Vancouver, British Columbia--(Newsfile Corp. - October 25, 2018) - Wildsky Resources Inc. (formerly China Minerals Mining Corporation) (TSXV: WSK) (OTC Pink: HWTHF) (the "Company") announces that the company has received final assay results from the 2018 drilling program on the historic tailings deposit at its Table Mountain property.
In July 2018, 512 metres was drilled in 128 holes to test the gold content of the historic 'Erickson Gold Mine' tailings deposit at the Table Mountain property. Results for the tailings samples average 1.254 grams gold per tonne and range between 0.506 and 6.670 ppm Au (equivalent to grams gold per tonne; see table). Thickness of the deposit averages 4.0 metres and ranges between 1.2 and 7.0 metres. Gold is present throughout the deposit and is slightly higher (> 1.0 g/t Au) in the western half (see map below).
Wildsky Resources 2018 Tailings Drilling Assay Results
| Hole | Length(m) | Au_(ppm) | Hole | Length(m) | Au_(ppm) | |
| L001 | 3.81 | 1.480 | L065 | 3.51 | 0.850 | |
| L002 | 3.96 | 1.095 | L066 | 3.96 | 0.705 | |
| L003 | 4.57 | 1.020 | L067 | 3.66 | 0.984 | |
| L004 | 3.96 | 0.985 | L068 | 4.27 | 1.125 | |
| L005 | 4.88 | 1.045 | L069 | 5.49 | 1.185 | |
| L006 | 4.27 | 0.954 | L070 | 4.57 | 1.695 | |
| L007 | 3.96 | 0.997 | L071 | 6.71 | 1.310 | |
| L008 | 4.36 | 0.854 | L072 | 2.29 | 1.500 | |
| L009 | 4.88 | 1.600 | L073 | 6.71 | 0.884 | |
| L010 | 3.11 | 0.925 | L074 | 4.27 | 0.980 | |
| L011 | 3.05 | 1.680 | L075 | 3.51 | 1.965 | |
| L012 | 3.11 | 1.650 | L076 | 2.13 | 1.985 | |
| L013 | 3.51 | 1.285 | L077 | 4.27 | 0.905 | |
| L014 | 3.51 | 1.110 | L078 | 1.52 | 0.862 | |
| L015 | 3.81 | 0.938 | L079 | 2.74 | 1.205 | |
| L016 | 3.66 | 1.070 | L080 | 1.68 | 1.325 | |
| L017 | 4.27 | 0.998 | L081 | 3.20 | 0.846 | |
| L018 | 4.11 | 0.986 | L082 | 3.35 | 0.747 | |
| L019 | 3.96 | 1.195 | L083 | 3.08 | 0.931 | |
| L020 | 4.27 | 0.758 | L084 | 3.96 | 0.744 | |
| L021 | 3.05 | 1.080 | L085 | 3.66 | 1.060 | |
| L022 | 4.88 | 0.884 | L086 | 3.66 | 0.939 | |
| L023 | 3.35 | 0.957 | L087 | 3.66 | 0.946 | |
| L024 | 4.88 | 1.345 | L088 | 3.35 | 0.816 | |
| L025 | 2.74 | 1.190 | L089 | 3.66 | 1.385 | |
| L026 | 5.18 | 1.630 | L090 | 4.33 | 0.984 | |
| L027 | 4.60 | 1.045 | L091 | 1.83 | 1.685 | |
| L028 | 5.18 | 1.180 | L092 | 5.79 | 0.865 | |
| L029 | 4.42 | 0.882 | L093 | 5.49 | 1.820 | |
| L030 | 3.96 | 1.030 | L094 | 7.01 | 1.040 | |
| L031 | 2.74 | 1.185 | L095 | 2.74 | 6.670 | |
| L032 | 3.35 | 1.085 | L096 | 5.64 | 1.140 | |
| L033 | 4.57 | 1.020 | L097 | 5.18 | 1.830 | |
| L034 | 3.96 | 1.145 | L098 | 3.96 | 0.938 | |
| L035 | 4.57 | 0.919 | L099 | 3.66 | 0.956 | |
| L036 | 3.35 | 0.841 | L100 | 3.96 | 0.926 | |
| L037 | 3.35 | 0.954 | L101 | 3.66 | 0.904 | |
| L038 | 3.35 | 0.974 | L102 | 4.27 | 1.190 | |
| L039 | 3.66 | 1.040 | L103 | 4.27 | 0.943 | |
| L040 | 3.35 | 1.165 | L104 | 3.66 | 0.772 | |
| L041 | 3.81 | 1.070 | L105 | 3.66 | 1.055 | |
| L042 | 3.66 | 0.880 | L106 | 4.88 | 1.265 | |
| L043 | 3.66 | 1.220 | L107 | 6.10 | 0.966 | |
| L044 | 3.96 | 0.638 | L108 | 5.18 | 3.550 | |
| L045 | 3.51 | 1.155 | L109 | 2.74 | 0.781 | |
| L046 | 4.57 | 1.015 | L110 | 5.18 | 1.135 | |
| L047 | 2.44 | 0.865 | L111 | 1.83 | 1.000 | |
| L048 | 5.49 | 0.883 | L112 | 5.18 | 1.100 | |
| L049 | 5.18 | 0.767 | L113 | 1.83 | 5.810 | |
| L050 | 5.49 | 0.806 | L114 | 1.52 | 3.880 | |
| L051 | 4.57 | 1.770 | L115 | 3.96 | 0.937 | |
| L052 | 4.27 | 4.180 | L116 | 4.27 | 0.871 | |
| L053 | 3.35 | 2.130 | L117 | 3.96 | 0.858 | |
| L054 | 5.49 | 0.840 | L118 | 3.66 | 0.922 | |
| L055 | 2.90 | 1.840 | L119 | 5.49 | 0.886 | |
| L056 | 3.96 | 0.847 | L120 | 5.49 | 1.205 | |
| L057 | 1.22 | 1.775 | L121 | 6.10 | 1.135 | |
| L058 | 3.66 | 1.140 | L122 | 4.27 | 1.210 | |
| L059 | 3.35 | 0.944 | L123 | 3.96 | 1.430 | |
| L060 | 3.20 | 0.924 | L124 | 2.44 | 0.506 | |
| L061 | 3.20 | 0.909 | L125 | 5.64 | 1.765 | |
| L062 | 3.66 | 0.888 | L126 | 5.64 | 1.755 | |
| L063 | 3.66 | 0.902 | L127 | 4.57 | 1.235 | |
| L064 | 3.66 | 0.824 | L128 | 6.71 | 1.270 | |
This deposit has dimensions of approximately 175 x 150 x 4 metres, with an estimated volume of 105,000 cubic metres of tailings. The holes were drilled at a regular spacing of approximately 25 metres with a sonic drill. Each hole was 7.6 centimeters in diameter and the holes averaged 4 metres in depth. Hole collar positions were located using a field grid and hand held GPS. The cored material was collected in plastic tubes, which were then cut in half lengthwise.
