Collective Mining

Abcourt Mines: 2,462 Meters of Surface Diamond Drilling Completed on Abcourt-Barvue Property in December 2016 and January 2017; In Most Cases, Excellent Results Were Obtained

Mont-St-Hilaire, Quebec, Canada / TheNewswire / February 21, 2017 / Mr. Renaud Hinse, President and Chief Executive Officer of Abcourt Mines Inc. (TSX-V: ABI, Berlin: AML-BE and Frankfurt Stock Exchanges: AML-FF) ("Abcourt" or the "Company") is pleased to announce that 10 surface holes were drilled, for a total of 2,462 meters, on the Abcourt-Barvue property located near Val-d'Or, Quebec, Canada, and in most cases, excellent results were obtained. See below:

Hole No. From (m) To (m) Length (m) Ag g/t Zn%
AB 16-06 211.5 219.0 7.50 66.8 2.66
AB16-07 172.0 176.0 4.00 43.0 1.86
AB16-08 251.0 254.6 3.60 21.9 6.08
AB16-09 220.5 230.5 10.00 47.8 1.55
AB16-10 222.0 231.1 9.10 41.5 3.27
AB16-11 See Note 1
AB16-11 A 230.0239.0 235.0250.3 5.0011.30 37.87.4 4.092.80
AB16-12 160.0275.7 161.93292.4 1.9316.65 12.94.7 13.802.00
AB17-01 318.0 319.75 1.75 15.6 0.38
AB17-02 234.0240.0 240.0242.9 6.002.90 49.82.2 1.374.25

Note 1: Hole abandoned due to important deviation.
Most of these holes were drilled to increase the amount of information on which the inferred resources calculations are based.
True widths represent between 60% and 75% of core lengths.
The intersections were obtained at depths of about 250 meters.
Additional drilling on this property is justify as long as this kind of results continue to be obtained.

QA/QC PROCEDURE

N.Q. core is placed in boxes at drill site and boxes are delivered to the core shack by the drillers. Hole locations and dips of holes are checked by an Abcourt employee. Core is logged and samples taken are marked by a qualified person. The sampled core is cut in half by a diamond saw, half being kept in the core box and stored on the site, the other half being taken to Laboratoire Expert in Rouyn-Noranda for assaying by the atomic absorption method. For every twenty samples of core, a standard sample is included in the batch. At the laboratory, one sample in ten is analyzed in duplicate. Sample rejects and unused pulps are returned and stored at the project site. Laboratoire Expert is not an accredited assayer but the use of standard samples enables us to check the accuracy of the assays.

New resources calculations in 2014

A 43-101 report on the Abcourt-Barvue resources was prepared by Mr. Jean-Pierre Berube, engineer and independent consulting geologist with pertinent experience in this field. This report indicates an increase in indicated and inferred resources in comparison with those of 2006. This report was filed on SEDAR. Here is a comparative table of resources in all categories:

Table 1. Resources of all categories

2014 Estimate 2006 Estimate

CATEGORY   TONNES Ag (g/t) Zn (%)   TONNES Ag (g/t) Zn (%)
Measured   6,284,000 43.98 3.09   6,516,000 58.32 3.33
Indicated   1,799,000 95.51 2.94   503,000 98.35 3.44
M + I   8,083,000 55.45 3.06   7,019,000 61.19 3.33
Inferred   2,037,000 114.16 2.89   1,506,000 120.53 2.98

If the open pit outlines designed in 2007 by GENIVAR remain unchanged, it is estimated that 77% of the measured and indicated resources will be extracted from an open pit and 23% from underground operations.

The increase in tonnage between the 2006 estimate and the 2014 estimate was brought about by additional diamond drilling in 2010 and 2011 and by a substantial increase in the price of silver which enabled us to use a lower cut-off grade.

The measured resources are generally extending from surface to a maximum depth of 165 meters. The indicated resources are generally located in the immediate extensions of the measured blocks from elevation -125 to -300 meters.

About Abcourt Mines Inc.

Abcourt Mines Inc. is a gold producer and a Canadian exploration company with strategically located properties in northwestern Quebec, Canada. The Elder property has gold resources (2012) and a positive P.E.A. study. Abcourt is focusing on the exploitation of the Elder mine.

The Abcourt-Barvue property has silver-zinc resources (2014). A feasibility study was completed in 2007 by Roche / Genivar on the Abcourt-Barvue project.

In 2016, Abcourt acquired the Sleeping Giant mine and mill, located half-way between Amos and Matagami, in Abitibi, Quebec, in the territory covered by the Plan Nord of the Quebec government. The mill has a capacity of 700 to 750 tonnes per day and the Sleeping Giant property has measured and indicated historical resources of 306,000 tonnes with a grade of 12.3 grams of gold per tonne and 42,000 tonnes of inferred historical resources with a grade of 12.4 grams of gold per tonne. Other advanced exploration properties were also acquired, with, in aggregate, historical indicated and measured resources totaling 403,210 ounces of gold and historical inferred resources of 432,000 ounces of gold.

Historical resources in copper, zinc, gold and silver are found on the Aldermac and Jonpol properties.

Work must be done to upgrade or verify the historical mineral resources as current mineral resources.

A qualified person has not done sufficient work to classify the historical estimate as current mineral resources, and the issuer is not treating the historical estimate as current mineral resources.

To know more about Abcourt Mines Inc. (TSXV: ABI), please visit our web site at www.abcourt.com and consult our filings under Abcourt's profile on www.sedar.com.

This press release was prepared by Mr. Renaud Hinse, Engineer and President of Abcourt Mines Inc. Mr. Hinse is a "Qualified Person" under the terms of Regulation 43-101. 

GET DAILY NEWS FLOW

Sign Up To Receive All Morning
News To Your Email Inbox

Please review our Disclaimer and Privacy Policy before subscribing.

MYRIAD URANIUM (CSE: M)

Myriad Uranium

Myriad Uranium holds a 75% earnable interest in the Copper Mountain Uranium Project, which saw US$78m in expenditures by Union Pacific during the 1970s. Union Pacific drilled 2,000 boreholes, discovered 7 uranium deposits, and developed... LEARN MORE